Craden DP9 Spezifikationen Seite 1

DP8 & DP9 DOCUMENT PRINTERS OPERATORS MANUAL 7860 AIRPORT HIGHWAY, PENNSAUKEN, NJ 08108 (856) 488-0700 (

3.5.2 Communication Parameters Press 9 3 FUNCT to display the following Communication Parameters or press 9 0 0 FUNCT to print them on a previously i

3.5.4 Service Parameters Press 9 4 FUNCT to display the Service Parameters in the following format. These parameters are factory selected specifi

3.6 Diagnostics 3.6.1 Power Up Diagnostics Diagnostics run automatically during power-up. If a fault is detected, ROM or RAM TEST BAD may be displa

3.9.3 Page Overflow If the printer is commanded to move past the last printable line on a document it will eject the document and display PAG

4.3 Installing Craden Drivers on WINDOWS NT, 2000, XP, VISTA, OR 7 (32-bit): A firmware upgrade may be required to run the Vista/7 driver.

4.4 Using Printer Resident Device Fonts Printer resident device fonts should be used whenever possible because they print faster than TrueType fo

5.2 Interface Protocols Either DTR or XON/XOF protocols may be selected from the keypad. In these modes the DTR signal will go false or a

6.3 No Document Motion If a document will not advance upon insertion: 1. Press EJECT if a previous document was manually removed without an eject

6.11 Ribbon Shield Removal / Replacement Open the cabinet, center the carriage and pull the lifter ring out and down t

6.11.1 Ribbon Shield Face Inspection The ribbon shield prevents ribbon fabric from rubbing on and smearing printed documents. It is a consumable.

DP8 & DP9 Operators Manual Table of Contents FUNCTIONAL SPECIFICATIONS 1 INSTALLATION & RESHIPMENT 3 RIBBON CARTRIDGE LOADING

7.0 Lubrication And Cleaning 8.1 Lubrication There are no lubrication points in the printer. All parts are either permanently lubric

8.0 Recommended Spare Parts Machine Population: 1 10 25 50 100 250 Class A Spares Qty: 1 1 2 3 5 10 Class B Spar

WARNING This equipment generates, uses and can radiate radio frequency energy and, if not installed in accordance with the instruction manual, may

DP8 & DP9 DOCUMENT PRINTERS - FUNCTIONAL SPECIFICATIONS 1.1 Print Characteristics Print Method 24-wire dot matrix impact, automatic thickness co

2.0 INSTALLATION 2.1 Installation Procedure 1. Read 3.1 to 3.5.2 on Operation and Configuration. 2. Press the latches on the lower front ca

2.2 Reshipment If possible, retain the original packing material for reshipment. If the original packing material is not used, insure that printer an

3.2 Keypad Operation EJECT: ejects an inserted document if the print buffer is empty. A: moves a document up 1/60" with each depression.

3.4 Document Insertion Insertion procedures may be customized to satisfy varied applications and user preferences. (See Printer Parameters in

3.5.1 Printer Parameters Press 9 2 FUNCT to display the following parameters or press 9 0 0 FUNCT to print them on a previously inserted d